What is MPO Fiber Patch Cord?
What is MPO Fiber Patch Cord?
Blog Article
What is mpo fiber patch cord? MPO fiber patch cord play an important role in the increasing optical communication due to their advantages such as large number of cores, small size and high transmission rate. They can meet the high-density wiring solutions of data centers.
What is mpo fiber patch cord?
MPO (Multi-fiber Push On) fiber patch cords composed of connectors and optical cables and are high-density fiber transmission patch cords. MPO connectors are one of the MT series connectors. They are multi-core and multi-channel plug-in connectors. The MT series ferrules precisely connected with guide pins (also called PIN pins) using two guide holes with a diameter of 0.7mm on the left and right of the ferrule end face. MPO fiber patch cord products mainly include MPO pre-terminated fiber patch cords, MPO branch fiber patch cords, and MPO fan-shaped optical fibers.
Common core counts of MPO Fiber Optic Patch Cord
The more common MPO cores are 12 cores, 16 cores, and 24 cores.
12-core MPO fiber patch cords used in 40G networks, and 24-core MPO fiber patch cords are used in 100G networks. 16/32-core MPO fiber connector is the best solution for low latency and ultra-high-speed transmission of 400G network.
Advantages of MPO Jumper
(1) Small size, which increases the wiring aperture, thereby greatly improving the wiring density and saving space.
(2) Modular design, plug and play, saving installation time.
(3) According to different configuration requirements, the corresponding structure can selected to meet different wiring needs.
(4) It has excellent optical and mechanical properties and low insertion loss in high-speed network environment.
(5) Convenient wiring and time saving. 100% factory pre-terminated and tested to ensure transmission performance, can quickly configured and networked, and reduce on-site installation time.
(6) It takes up less space in the cabinet and can be better managed vertically compared with traditional jumpers.
What are the benefits of using pre-terminated optical cables in data center rooms?
Due to the centralized system platform, data center rooms will cause serious losses once the system goes down. This loss is far greater than the initial investment in hardware. According to statistics, to reach a level 4 data center, that is, the reliability reaches 99.995%, the investment required is 1.8~2.2 times that of a system without redundancy.
As the physical copyright platform for information exchange in data centers, integrated cabling accounts for less than 5% of the total investment. And its importance is very high. According to statistics from authoritative organizations, 70% of data center failures caused by human errors. And a large number of them caused by improper human operation of cabling management.
Although the data center strictly protects its cabling management area. But for operators, facing a large number of cable connections. Every connection change is a huge challenge. The data center needs a set of integrated cabling systems specially built for its characteristics. This system should have the following characteristics: high performance, high reliability, and fast installation. Modular system, high density, and future-oriented. Therefore, the pre-terminated optical cable management system came into being.
MPO Fiber Patch Cord Three Line Sequences
Type A: The fiber cores at both ends of the jumper are arranged in the same position, that is, 1 at one end corresponds to 1 at the other end, and 12 at one end corresponds to 12 at the other end. The key directions at both ends are opposite, key up corresponds to key down.
Type B: The fiber cores at both ends of the jumper are arranged in opposite positions, that is, 1 at one end corresponds to 12 at the other end, and 12 at one end corresponds to 1 at the other end. The key directions at both ends are the same, that is, key up corresponds to key up, and key down corresponds to key down.
Type C: The C-type MPO jumper is a pair of adjacent fiber core positions crossed, that is, the fiber core 1 at one end corresponds to 2 at the other end, and the fiber core 12 at one end is 11 at the other end. The key directions at both ends are also opposite, key up corresponds to key down.
Report this page